Painting Your Brick Fireplace

Painting Your Brick Fireplace

If you have a chance to give your brick fireplace an emotional new look, all it takes is a little effort or elbow grease and a couple of tools, and some paint. gives few steps to follow in painting a brick fireplace and change the look of your room.

Make Sure You Have the Right Material

Many things can be included in a good to-paint list, most brick fireplaces— sandstone, limestone, river rock, for example—are less amiable and difficult to change once you do a painting on them.

Occasionally, if you think you might need to paint your fireplace, make sure you surround it with a brick first.

Clean the fireplace

If you want your paint adheres and dries appropriately, you will have to clean the block thoroughly with a wire scrub brush to get off any soil or dust.

Apply No sudsy Trisodium Phosphate which is also known as TSP. Make sure you put on your gloves and goggles for safety and wash completely and thoroughly using a heavy-duty washer.

After washing, leave it to dry. Tape off the regions that you do not want to paint.

Prime the brick

If you make a proper use of the fireplace with a stain-blocking, and oil-based paints, they can assist in guarding your paint against future smoke stains.

To apply, lay a drop material and apply paint to the whole surface, following the manual as indicated on the can by the manufacturer.

Paint the brick

The moment you feel the primer has dried up, then it is time to paint and maybe coat once or a few times. Pick a good indoor latex paint, either level, semi-gloss, or gleam that is evaluated to withstand temperatures created by the fireplace (usually around 200° Fahrenheit), and a roller meant particularly for textured surfaces.

The last will assist in covering the surface of the block, which is most likely not by any means smooth. For any detects that you cannot achieve with a roller, touch it up with a paintbrush. Then, you will apply both second and third layer as required.

Note: This kind of paint is only suitable for the exterior of a brick fireplace, not the interior of the firebox. If you need to paint the firebox, you will need to require a heat resistant paint.

Best Paint for Guns

Best Paint for Guns

Tools and materials

× Chemical resistant gloves
× sprayer
× Masking tape
× Eye goggles
× Spray paint
× Solvent

The first thing you need is a Reliable Painter or you can do it yourself.
Wipe your gun clean from dirt, oil, and grime because the it will surely affect the end result of your paint job if any of these is present.

Then you have to dis-assemble the gun. Detach the bolt carrier and bolt, the handle and all other parts connected to these parts.

Aluma-Hyde II

This paint is one of the best because it has a high resistant level to chemicals used in cleaning the gun such as solvents, detergents, and bore cleaners.

Bore cleaners are always very good when cleaning the bore of your guns but the bad thing about them is that they can damage a paint job on the gun easily.

After painting with Aluma-Hyde II and curing for a reasonable period of time, this paint will develop characteristics that will make it resistant to the damaging elements of solvents and other harmful chemicals.

Dupli-Color High Heat 1200

If you want to re-paint your firearms, Dupli-Color High Heat 1200 is the best paint to use.

This paint is actually an engine paint used in painting car engines which makes it very good at withstanding intense heat and other harsh conditions.

It can easily resist grease, salinity, corrosion, moisture, chemicals and oil.
Also, it is relatively cheaper than other brands that go well with guns while at the same time, creating that sophisticated matte black color finish.

Just apply two coats of the paint with about a 10-minute interval to let the first coat dry.

After the second coat, leave to dry for 20 minutes. Then bake for about one hour and thirty minutes.

Krylon Black

Choose the Krylon-Black spray if you want that professional type of re-paint job on your gun. This brand and type of paint will definitely give your gun that professional look.

All you need to do is hold the sprayer at 8 to 12 inches away from the gun and then spray paint it in a sweeping side-to-side motion.

After fifteen minutes the paint dries up and it is safe to handle after an hour.

How to Use a Paint Roller Tray

How to Use a Paint Roller Tray

For some reason, most people do not know how to use a paint tray properly.

When using a roller, they typically pour some paint into the tray, roll the roller around for a little time, and then start painting.

To use a paint tray properly requires more than that.

Here are tips i found on Chesterfield exterior painter, explained below to make sure that you use these potentially expensive pieces of equipment the right way, and to ensure that you are not wasting your time, resources or money in the process.

Mix the paint

The paint has to be thoroughly mixed before it can be used. It would be of great advantage to have the paint mixed using one of those paint mixing machines, but the setback is that you don’t have to wait before using it, this will require you to use the paint quickly.

You can mix the paint yourself with a stirring stick and mix the paint as well as possible. When you are done mixing the paint, you will pour about 1/3 of the can into the dark part of the tray.

Cover the entire roller

Make sure to include the complete roller when you place the roller in the tray. Covering just one side of the roller, thinking that the roller will carry over the uncoated part is not sufficient.

As you are coating the roller, ensure not to spill a paint on the outside of the tray accidentally.

Dry the roller

After the roller is being coated, you have to dry the roller just a little. Here is what we use the long and shallow side of the tray for.

Depending on what you use, roll the roller on the long side or screen a few times so that the roller will not be dripping with paint. When you are done with that, you can then start painting.

Start painting

Start painting the walls as you normally would, usually from the bottom corner of the wall. Work your way up through a “W” pattern.

Refill the paint roller following the necessary steps as required, in addition to filling the paint tray until the job is completely done.

Clean when finished

You need to clean the tools used once you are done with your work. As it will help in reusing the material again, or if you do not plan to use it again for some time and plan to resell.

Either way, taking the time to clean the equipment thoroughly will be able to protect your investment.

Product Dyno Review

If you sell Digital Products online, anything from eBooks and training, to plugins, desktop tools or web based, software services etc. I think you are about to fall in love with ProductDyno.

Do you know why?

Because it has built services from the ground up to make your life easier. To help get your products into the marketplace faster. And to smooth out all those “bumps in the road” vendors like you face every day when you sell online.

Businessman drawing strategy concepts

It simplifies your product delivery, protect and secure your valuable content and seamlessly connect your customers to your marketing messages. I can guarantee your profits today and your success going forward continues to soar!

ProductDyno is all about connections. It’s bridging the gaps between sales and delivery, and removing any obstacles between your next great ideas and getting it into the hands of as many people as possible. ProductDyno gives you everything you need ALL IN ONE PLACE.

  • Connecting your payment processor to beautiful, custom branded and secure download pages.
  • Giving you the ability to expand your reach by selling across multiple platforms simultaneously.
  • Integrating each sale with your auto responder services.
  • And including, transactional emails, member management, licensing, powerful web hooks, and time saving automation.
  • Even a robust and flexible API.

Everything together to ensure as your business grows it will be with you every step of the way.

For more details, please check out the honest ProductDyno Review.



Even though BRS Custom Painting has one of the most popular interior wall paint colors which vary based on the furnishings, home styles and window coverings, white has always been the most used color of choice.

This is because rooms painted in white add the impression of roominess and there is also feeling of freshness, coolness and cleanliness. Nevertheless, too many white rooms can make a home feel barren and uninviting.

Interior Wall Paint Color Tints

The interior walls of a home can easily, quickly and inexpensively be remodeled by adding more wall paint colors, to most homes’ basic white color scheme.

It can add warmth, charm and even elegance to a home. For some, it is just the addition of a tint of color, such as blue, brown or red that will subtly change a home’s color scheme.

However, for a more dramatic color change, considerations of lighter shades of blue, brown, or red will add greater warmth and also the addition of shades of blues or pinks to furniture, window or floor coverings.

The Function of the Room Dictates Will Dictate the Colors Schemes

For kitchens and bathrooms where a cheery atmosphere is needed, the shade of the color yellow provides a sense of serenity and happiness.
You can also use color red, although its vibrant hue can be a little overpowering.

Therefore, it should be used to accent rather than cover an entire room or wall. You can do this by painting small pieces of trim or furniture in the room.

Also, adding the color orange will also brighten up and add coolness to a room.
For comforting and cooler ambiance, you can’t beat the color blue.

It is often used for bedrooms or dens and It comes in many shades. It is a hard working color that provides elegance and sophistication when it comes in darker shades of navy and midnight blue.
Lighter shades of blue suggests the sunny days of summer.

Color Choices

Although choosing colors can be a daunting task, but thanks to home improvement and paint stores, you can narrow down the choices through the use of color wheels and paint sample chips.

Color wheels and paint samples will show the different hues and shades of the actual paints. Also, many paint outlets can mix several colors to come up with exactly the shade that you need.

Before purchasing the final mixed paint product, it is advisable that you collect paint chips and samples, and then take them home to make comparisons with window, furniture and floor coverings.

« Previous Entries